Thread rolling machine

The thread rolling machine, system Markthaler - MBM Schellhammer, for professional coarse regulation threads. The sophisticated, very stable machine is designed for workshop use. Regulating threads from diameter 1.5 - max. 2.2 mm can be rolled on brass and aluminum wire and in exceptional cases on soft iron wire* quickly and with highest precision. Despite high rolling pressure, the motion sequence is smooth thanks to the ball-bearing profile jaw bearings.

The threads can be placed at any point on the wire. The rolling process results in a larger thread outer diameter, which means that the nuts can also be pushed over the smooth wire to the thread and grip it well.

The super sharp thread guarantees optimal hold for leather, plastic or wooden nuts. In the picture below you can see a threaded wire made with the thread rolling machine. Above, a good result of the ring clamp.

*with high-strength jaws "Platinum" (special equipment) a processing of soft stainless steel wire is possible. Unfortunately, stainless steel cannot be rolled as well as brass, so losses in thread quality must be expected.

If you are interested, we will be pleased to send you further information or a sample thread wire.

Thread length in one operation depending on jaw width like 20 or 35 mm. However, the thread can be applied without any problems.
Thread pitch 0,7 mm for all diameters
Thread outside 0,4 mm larger than wire
Wire thicknesses D= 1.5 to 2.2 mm
Wire material do not use hard metals
Jaw guide precise, smooth-running ball guides
threaded jaws available widths 20 and 35 mm
Standard right-hand threads. Left-hand threads on request.


Scope of delivery: complete machine with standard pair of dies in 35 mm width, length stop and operating instructions packed for transport.

Delivery time: As of 06/2023 short term 1 piece from last small series. We accept pre-orders for the next small series with currently a delivery time of at least 6 months!

Do you look for a gernerellen overview over versch. If you are looking for a general overview of different devices for the production of thread wires, please click on the following link Thread Wires in our digital catalog.


Instruction manual



Product variants
Part number
Net price
Gross price
"Platinum" thread rolling dies 35 mm wide - Pair -
735,00 €
874,65 €
Thread rolling dies standard 35 mm wide - pair -
620,00 €
737,80 €
Thread rolling machine GW5 "System Markthaler" with 35 mm standard jaws without delivery
6.500,00 €
7.735,00 €